Stock # N10204
Model 510 Cone Head Chipper
Cummins 173 HP Engine
18" Diameter Capacity
6,000 Lb. Tor-Flex Tandem Axles
235.85R16 Tires With Heavy Duty Rims
360 Degree Swivel Discharge With Adjustable Flipper End To Deflect Chips
35 Gallon Fuel Tank
12,000 Lb. Pinned Drop Leg And Foot Jack Stand
Four Knife Pockets
Frame Mounted :10 Gauge Steel Battery Box
6" Structural Frame
21 Gallon Hydraulic Tank With Magnetic Drain Plug and Mesh Strainer At Opening
34" Outside Diameter Tapered To 24" Center Diameter:
Precision Balanced Cone-Head® Drum With 28"
Overall Cutting Width And 18" Cutting Height, Automatic Feed System
7/16" Slip Hooks On safety Chains with Spring Loaded Latches
4" x 6" Tubing With 5/16" Wall Thickness Tow Bar
2 1/2" I.D. Pintle
Lockable Tool Box -Battery Box - And Tanks
3/8" Thick Infeed Floor - Chute - 88" W X 38" H From Beginning Of Chute
Controls Located Curb Side For Operator Protection
12 Volt Self adjusting Brakes,
12 Volt Lighting
Dupont Imron Paint
ASTM A311 2 7/16" Diameter Solid Steel Chipper Shaft
2 Horizontal Hydraulic Feed Wheels W/Hydraulic Lift and Down Pressure Assist
Two 2 7/16" Spherical High Speed Bearings Rated 2 Dynamic 38,000 Lbs. - Radial 5,215 Lbs. With 10,000 Hours Service Life
Extendable Tongue
Weight: 8,900 LBS.
Price: $60,941.00
All other manufacturers claim that their chippers "use less fuel" or are "more efficient". So do we. But we can prove it. Comparative tests by an independent agency conducted scientific tests to accurately quantify and document the differences in the various chipper designs on the market (disc, drum, Cone-Head drum, and Discone). Findings confirmed that the patented Cone-Head and patent pending Discone chippers produce more tons per horsepower per hour and use less fuel while doing it (more tons/gallon) than both disc and drum style chippers.
Others can say they are better. We can prove it with a tape measure, scales, and a dipstick. Try one and you'll see for yourself.
- Knife angle creates slicing action
- Unique Chipper drum design improves efficiency up to 63%
- Many models and horsepower ranges to choose from
- Feeds easier with less limbing and trimming (Widest In-feeds)
- Chips easier with less horsepower
- Chips most efficiently: Wood naturally moves to center of Cone-Head ® at highest torque area to maximize horsepower
- Lower fuel consumption: Cone Head ® chips easier
- Lower maintenance cost: Smooth chipping action is less abusive to the overall machine increasing machine life
- Minimal vibration resulting in less metal fatigue
- Low slung wide in-feed is easy to feed, resulting in fewer lifting related injuries and operator fatigue
- Unique rugged Cone Head ® drum requires less maintenance
- Cutting angle makes knives last longer
- Horsepower is matched with Cone Head ® and frame size
